01
Protection against electric shock
Modern RCBOs detect residual-current faults and disconnect the affected circuit, helping reduce the risk of serious electric shock.
CONSUMER UNIT REPLACEMENT
Fuse box
replacement.
Installed with care by NICEIC-approved electricians. Modern RCBO protection, surge protection, relevant testing and certification.
- Individual RCBO protection
- Surge protection included
- Electrical Installation Certificate
- Appointments planned around your day
From £580 + VAT£696 including VAT · Up to 10 circuits*
*Subject to an assessment of the existing installation. Additional remedial work, if required, is quoted separately.
REAL A1 WORKNeat installation. Clear labelling.
ACCREDITATIONS
Accredited & Certified
Recognised standards. Professional installation and certification.
WHY UPGRADE YOUR FUSE BOX?
Better protection.
Greater peace of mind.
An older fuse box may still supply power, but it may not provide the protection available in a modern consumer unit. The right upgrade improves how electrical faults are detected and disconnected — helping protect your family, wiring and electrical equipment.
02
Faults stay more contained
Each RCBO also protects against overloads and short circuits. A fault on one circuit is less likely to leave other parts of your home without power.
03
Added surge protection
A surge protection device (SPD) helps limit sudden voltage surges that could damage connected appliances and electronic equipment.
04
Checked before switching on
We assess the suitability of existing circuits and essential earthing and bonding, then test the finished installation before issuing the certificate.
Important: A new consumer unit improves electrical protection; it does not fix damaged wiring or prevent every fault. Any defects or remedial work identified are discussed and quoted separately. Age alone does not automatically mean a fuse box must be replaced.
A CLEAN, PROFESSIONAL UPGRADE
Good work is in the details.
We make replacing your consumer unit straightforward: explain the work, plan the power interruption, install appropriate protection and carry out the required verification before issuing certification.
✓Modern metal consumer unit
✓Individual RCBOs
✓Surge protection
✓Testing and certification
✓Neat circuit identification
✓Space for future circuits
*Advertised from-price applies to eligible straightforward consumer unit replacements with up to ten circuits. Final scope and price are confirmed following assessment. Two spare ways refer to available positions, not additional RCBO devices. Future circuits require separate design and assessment.
WHAT OUR CUSTOMERS SAY
Real reviews.
Real reassurance.
★★★★★
“arranged promptly and carried out quickly”
Oxana Biryukova
★★★★★
“his work was neat and organised”
bre9631
★★★★★
“He arrived exactly when agreed”
Julia Hermiston
TRANSPARENT PRICING
Fuse box replacement.
No surprises on price.
A clear starting price for an eligible straightforward replacement. Your quotation confirms the actual equipment, tests and any remedial work needed.
CONSUMER UNIT REPLACEMENT£580 + VAT£696 including VATStarting price · up to 10 existing circuits
Included
Metal consumer unit, individual RCBO protection, SPD, relevant inspection and testing, labelling and an Electrical Installation Certificate.
Space to plan ahead
At least two spare physical ways in the new board, subject to board selection. Spare breakers and future circuits are not included.
If issues are found
Existing wiring faults, earthing/bonding upgrades and other necessary remedials are assessed and quoted separately before extra work.
SIMPLE FROM THE FIRST MESSAGE
Clear communication from start to finish.
No need to know every technical detail. We will explain what is involved and what we need to provide a quote.
01 / ENQUIRE
Tell us about your property
Send your postcode, property type and a photo of your current fuse box.
02 / ASSESS
We review the work
We confirm what is included and whether a site assessment is necessary.
03 / INSTALL
Planned around you
We agree a suitable date and explain the anticipated power interruption.
04 / VERIFY
Testing & certification
We inspect and test the relevant installation and provide the appropriate EIC.
WHY HOMEOWNERS CHOOSE A1
Good electrical work. Carefully delivered.
We understand that your home is not a building site. We plan the interruption, explain the testing and take care over the finished installation.
01Clear communicationUnderstand the work and agreed price before we begin.
02Neat workmanshipThoughtful installation and clear circuit identification.
03Correct testingExisting circuits assessed, installation verified and appropriate certificate issued.
QUICKER QUOTATIONS
Not sure what fuse box you have?
Send us a clear photograph of your existing board and your postcode. We can review the likely scope, advise what else we need to know and let you know if a site visit is necessary.
✓ No electrical knowledge needed ✓ No need to remove any covers
GET A QUOTE WITH A PHOTOPhotographs are for an initial estimate, not a substitute for inspection or electrical testing.
Example: show the full fuse box in your photoANSWERS BEFORE YOU BOOK
Common questions, answered.
Do I need to rewire my whole house to replace the fuse box?
Not necessarily. The existing circuits must be assessed and suitable for reconnection. Any faults or remedial work identified during inspection or testing are discussed separately.
Will I be without power?
Yes, the installation needs to be safely isolated during parts of the work. We will explain the planned interruption before the visit, including what you may need to prepare.
What is included in the from-price?
The indicative package is for an eligible straightforward replacement up to ten circuits and includes a metal consumer unit, individual RCBO protection, surge protection, relevant testing and an Electrical Installation Certificate. Additional works, if needed, are quoted separately.
Can I add EV charging or a heat pump later?
Two spare ways allow physical room for possible future circuit protection. Any EV charger, heat pump or other new circuit needs a separate design, load and supply-capacity assessment and appropriate protective devices.
Can you work around my schedule?
We will try to arrange a convenient appointment, including for customers working from home, subject to availability and what the job requires.
Will changing the fuse board fix my tripping circuits?
Not necessarily. Repeated tripping can be caused by a fault elsewhere in the installation or connected equipment. We can investigate and explain the appropriate remedial options; replacement is not automatically the solution.
Do I need to replace my fuse box because it is old?
Age alone does not determine whether replacement is required. The condition of the equipment, protection provided and the intended use of the installation need to be assessed.